I. SEAT DEPTH
The seat depth can be adjusted in one inch increments on standard
rehab seating.
1. Seat Frame Depth Adjustment
a. To adjust, loosen the two bolts (a & b) of the backrest
pivot plate side on each side of the seat.
b. Reposition the backrest to the desired position.
c. Retighten and retighten bolts on each side of the backrest
pivot plate.
2. Back Angle Adjustment on Seat Frame
a. Remove the front securing bolt (d) on the side of the
backrest pivot plate.
b. Loosen the lower rear bolt (e)
c. Set at desired angle. There are ten holes (in 3º incre-
ments) to choose from.
d. Reinstall the front bolt and tighten both bolts securely.
IX. OPERATING GUIDE
A.PERFORMANCE CONTROL SETTINGS
Q-NOTE- Seek advice regarding checking and adjusting settings.
It is vital to match control settings to your level of function
and ability.
Consult your health care professional and your supplier
to select the best control setting for you.
For your safety, have the setting of your chair verified every
six months.
WARNING
Have your control settings re-adjusted immediately if you
notice any change in your ability to:
• Control the joystick.
• Avoid running into objects.
4.Control Settings can be adjusted by your dealer.
B. THERMAL ROLL-BACK
Your chair has a thermal roll back circuit. This protects the
controller from damage due to overheating. In extreme condi-
tions (such as repetitive hill climbing) the circuit will decrease the
power to your motors. This allows the chair to operate at a
reduced speed. When the controller cools, the chair will return
to normal speed.
Quickie
X2
Owner’s
Manual Rev.
A
17.
e
d
a b c
