Quickie
®
SEDEO
®
LITE
252852 Rev. C
16
5.0 SETTING UP THE SEATING SYSTEM
5.8 Pre-set power center mount leg rest
DANGER/WARNING!
1.
Be aware of your environment to ensure you do not injure your legs when leg rests are extended.
2.
Always ensure that the leg rests or footplates do not come into contact with the casters before
driving the wheelchair. (Fig. 5.21)
3.
Leg rests are not to be used for lifting or carrying the wheelchair under any circumstances.
4.
As with all moving parts be careful not to trap your fi ngers. (Fig. 5.23)
Lower leg length (Fig. 5.22)
The power center mount leg rest allows angle adjustment from 90° to 180° level to ground and a 7-in
(180 mm) powered length extension.
1.
Loosen (A) by one turn.
2.
Adjust (B) to the desired position.
3.
Tighten (A).
4.
Repeat for the other side.
Ankle angle (Fig. 5.23)
1.
Flip up (A).
2.
Turn (B) in order to adjust the ankle angle as desired (4 mm Allen key).
3.
Fold (A) down.
DANGER/WARNING!
1.
After adjustment and with the seat in its normal drive position:
Ensure there is a gap of [ > 1-in ( >25 mm) ] between the fl oor and the footplate at all times.
2.
Perform this test with the user sitting in the chair loading the leg rest.
3.
Using the chair with the leg rest set too low might result in personal injury or damage to the
wheelchair and its surroundings.
Calf pad height (Fig. 5.24)
1.
Loosen (A) by one turn.
2.
Adjust (C) to the desired position.
3.
Tighten (A).
Calf pad width (Fig. 5.24)
4.
Loosen (B) by one turn.
5.
Adjust (C) to the desired position.
6.
Tighten (B).
Fig.5.21
Fig.5.22
Fig.5.23
Fig.5.24
Содержание QUICKIE Sedeo Lite
Страница 31: ...252852 Rev C 31...