Sunrise Medical QUICKIE SALSA, Инструкция по применению, Страница: 33 / 39

Quickie SALSA
33
060474
ENGLISH
11.3 Crash testing on the SALSA
A representative SALSA wheelchair has been tested in accordance
with the dynamic performance requirements specified in ISO
7176-19:2001 “Wheeled Mobility Devices for use in Motor Vehicles”
using an Q straint 6 point strap restraint system with two straps at
the rear which conform to ISO 10542 or SAE J2249 and was used in
accordance with the WTORS manufacturer’s instructions.
The Q straint restraint system was used for these tests. However
other restraint systems can be used as long as they conform to ISO
10542 or SAE J2249 and are used in accordance with the WTORS
manufacturer’s instructions. They must also be checked to make sure
that they are sufficiently specified for the weight of the wheelchair
and rider
11.4 The tie down label and placement
The label shown in Fig 95 is used to identify the tie
down points on all chair models.
The photographs below show the tie down label placements on the
Salsa
11.5 Securing the wheelchair into the vehicle
WARNING - The SALSA wheelchair requires a six-point tie down
system for transportation as shown in the photographs below.
The tie down restraints should be attached as close as possible at an
angle of 45°, and tightened securely in accordance with the restraint
manufacturers’ instructions.
All seating must be returned to its home position with the seat lift
fully down and the backrest fully upright.
The wheelchair parking brakes must be firmly applied.
11.6 SALSA tie downs (Fig. 98 - 100)
Fig. 95
Fig. 96
Fig. 97
Fig. 98
Fig. 99
Fig. 100