Sunrise Medical Quickie RX Kidz, Руководство пользователя

Страница: 31 / 47

27
RX Kidz
Issue 2
Fig. 33
Chair adjustments
Seat height (option)
Seat height can be adjusted by
moving the axle sleeve (1) vertically
(Fig. 33) in the axle plate slot (2).
This allows a 114mm adjustment in
13mm increments. First loosen the
28mm A/F outer retaining nut (3)
sufficiently to allow the sleeve and
locating plate (4) to slide, and
position the sleeve and plate at the
required height, ensuring that the
keys (5) are located in the required
keyways (6). Tighten the retaining nut
using a torque wrench to a setting of
45Nm.
Note:
After adjusting the axle position,
the front castors must be checked
for adjustment.
2
1
Seat height adjustment (std.)
To adjust the seat height (Fig. 34),
remove the wheel by unscrewing
the 19mm A/F retaining nut (1, if
quick-release axles are not fitted),
the wheel spacer (2, if fitted), and
the axle (3). Move the axle to the
desired position using one of the
two holes (4) in the axle plate and
replace the axle and tighten to
45Nm torque setting, replace the
wheel, spacer and retaining nut and
tighten to 45Nm.
Note:
After adjusting the axle position, the
front castors must be checked for
adjustment.
4
5
6
3
Fig. 34
4
3
2 1