2.0 Safety
Follow the instructions carefully next to these warning
symbols! Not paying careful attention to these instructions
could result in physical injury or damage to the wheelchair or
the environment. Where ver possible, safety information is
provided in the relevant chapter.
2.1 Seating related symbols and labels used on the
product
The signs, symbols and instructions ..affixed to the wheelchair
comprise part of the safety facilities. They must never be
covered or removed. They must remain present and clearly
legible throughout the entire lifespan of the wheelchair.
Replace or repair all illegible or damaged signs, symbols and
instructions immediately. Please contact your authorized
dealer for assistance.
Fig. 2.1: Transit fixation point.
Fig. 2.2: Warning – Danger of finger entrapment (pinch point).
Fig. 2.3: Warning – Maximum user weight for the wheelchair.
Fig. 2.4: Warning – Ensure that the seat interface thumb
screws are screwed in tight before using
your
wheelchair, especially on a slope
.
2.2 Safety: Temperature
WARNING!
• Avoid physical contact with the wheelchair’s motors at all
times. Motors are continuously in motion during use a
can reach high temperatures. After use, the motors will cool
down slowly. Physical contact could cause burns. Allow the
motors a.fter using at least 30 min. to cool down.
• If you do not use the wheelchair, ensure that it is not
exposed to direct sunlight for lengthy periods of time Certain
parts of the wheelchair, such as the seat, the back and the
armrests can become hot if they have been exposed to full
sunlight for too long. This may cause burns or allergic
reactions to the skin.
Fig. 2.
2
Fig. 2.
1
Fig. 2.
3
Fig. 2.
4
Rev. B
Q700 M Ergo Seat
5
247554 Rev. A
