EN
GLISH
Q100R-Q200R Configured Rev. A
37
1
2
2
3
A
B
M5
M5
1
2
3
C
D
M5
M5
1
2
3
A
B
M5
M5
1
2
3
A
B
Fig. 10.1
Fig. 10.2
Fig. 10.3
Fig. 10.4
10.0 Headrest
10.1 Pre-set headrest
DANGER! / WARNING!
If a headrest is part of the options selected for the user/chair,
never drive the chair without the headrest attached.
Never use the chair without a headrest if a person is
transported with the chair in a vehicle.
Headrest height (Fig 10.1)
1. Loosen (A) a few turns.
2. Adjust (B) to the desired position.
3. Tighten (A).
Memory setting (Fig 10.2)
1. Loosen (C) by one turn.
2. Slide (D) as far down as possible.
3. Tighten (C).
Headrest position (Fig 10.3)
1. Loosen (A) by one turn.
2. Adjust (B) to the desired position.
3. Tighten (A).
NOTE / CAUTION!
Correct the headrest height and tilt the headrest cushion as
required.
Headrest cushion width position (Fig 10.4)
1. Loosen (A) by one turn.
2. Adjust (B) to the desired position.
3. Tighten (A).
