Sunrise Medical Lomax HDM, Руководство пользователя, Страница: 6 / 48

8/9HMB/9TM
1.4 Rules and regulations
The wheelchair is manufactured to meet the requirements of Medical Devices
Regulation
2017ll45,
BS EN 12183 and ISO 7176-19 - Wheeled mobility devices for use in motor vehicles.
• The wheelchair and occupant is capable of being transported in a vehicle using an
approved Wheelchair Tie Down Restraint System (WTORS).
• The Upholstery meets the requirements of ISO 7176-16 and the fire and furnishing
regulations SI 1324. Other materials wherever possible are ignition retardant.
• Sunrise Medical declares under its sole responsibility that this product is in conformity
with the requirements of
regulation 2017ll45.
1.5 Modifications and alterations
Making any unauthorised modifications or using non-approved parts, may change the wheelchair
structure and create an unsafe condition.
&
Neither Sunrise Medical nor your wheelchair provider will accept responsibility for
damage caused by misuse or non-compliance with instructions or advice set out in this
manual.
&
Users attempting to use the wheelchair beyond the manufacturer's recommendations
may put themselves at risk of serious injury or even death.
8/9HM 8/9TM User Manual Page6
1.3 Labels fitted to the wheelchair
HDM
Product Name/SKU Number.
XXXX-XX-XX
ISO 7176-19:2008
Maximum safe slope with anti-tip
tubes fitted, Depends on wheelchair
setting, posture and physical
capabilities of the user.
CE Mark.
User’s Guide.
Date of manufacture.
Serial number.
This symbol means Medical Device.
Manufacturer’s address.
Crash tested according to
ISO 7176-19:2008.
XXX mm
Seat depth.
Seat width.
XXX mm
Load Maximum.
XXX kg
kg
ma x X°
Sunrise Medical GmbH
Kahlbachring 2-4
D-69254 Malsch / Germany
2021-04-28
WHEELCHAIR
TYPE:
21021162000790
ISO 7176-19:2008
HDM STD
160 kg 6° 559 mm 457 mm
kg
max