Sunrise Medical COOPERS 10930C, Руководство пользователя

Страница: 6 / 12

ASSEMBLY INSTRUCTIONS
BRAKES
This rollator is supplied fully assembled with the exception of the
handles, backrest and basket.
To open
the rollator, hold it by the seat handle, push down and the
wheels will spread. The seat is now supported on the rear crossbar.
Fit the handles
to the vertical frame tubes.
Position the first handle to the height required, line up the hole for the
bolt and the appropriate hole in the handle and insert the bolt from the
inside of the frame.
Slide the curved washer onto the bolt and fit the locking wheel,
ensuring the hexagonal bolt head is located in the cut out of the
tube to stop it from rotating. Tighten the locking wheel and check the
handle is secure. Repeat for the other handle.
To fit the backrest
, locate the open ends of the backrest in the
location tubes at the front of the rollator above the seat.
Before using the walker, check the brakes operate and are correctly
adjusted.
When in motion, the brakes are operated by squeezing the loop
handles, each rear wheel being operated independently by the
appropriate handle.
To apply the parking brakes, push down on the loop handles.
To release the parking brakes, pull up on the loop handles.
To adjust the brakes there are two adjusters on each side of the
rollator, one in front of the brake handle and the second at the other
end of the cable just above the wheel.
CONTINUED
CINS/LHRL/ISS5
EXTRA HEAVY DUTY ROLLATOR