Sunrise Medical 248020 Скачать руководство пользователя страница 2

Страница: 2 / 44

Dealer signature and stamp

We at Sunrise Medical want you to get the best out of

your wheelchair. This Owner’s Manual will familiarize you

with the chair and its features. It contains hints on

everyday usage and general care in addition to

information on the high quality standards which we

adhere to and details about the guarantee.
Your wheelchair should be delivered fully configured for

your use; there are a wide range of components and

adjustments available. For further information about

these you should contact your Sunrise Medical authorized

dealer.
Your wheelchair will reach you in excellent condition

having been personally inspected before leaving our

factory. Following the guidelines for maintenance and

cleaning your wheelchair will maintain its first class

condition and give you complete satisfaction.
The wheelchair has been designed for use by an

individual on a daily basis. It is suitable for both indoor

and outdoor use. It is only intended for use as a

pavement vehicle, but may also be used when crossing

between pavements.
This vehicle has been designed for a single occupant of

limited mobility who has the cognitive, physical and visual

ability to control the vehicle safely. See page 8 and 1

for

maximum user weights.

If you are in any doubt as to the

suitability of the wheelchair, contact your local Sunrise

Medical authorized dealer for clarification, prior to

commencing use.
It is very important to read the relevant section of the

owner’s manual when making any minor adjustments.

Consult your local Sunrise Medical authorized dealer for

more complex adjustments.
If you have any queries about the use, maintenance or

safety of your wheelchair, please contact your local

authorized Sunrise Medical service dealer. If you do not

know of an authorized dealer in your area or have any

other questions please write or telephone.

Thank you for choosing a Quickie Power Chair. We want to

hear your questions or comments about this manual, the

safety and reliability of your system, and the service you

receive from your

uthorized

ealer. Please feel free to

write or call us at the address and telephone number below:

Sunrise Medical (US) LLC

Customer Service Department

2842 N. Business Park Ave

Fresno, CA 93727 USA

(800) 333-4000

Be sure to return your warranty card, and let us know if you

change your address. This will allow us to keep you up to

date with information about safety, new products, and

options to increase your use and enjoyment of this base

system.
You can also register your wheelchair at:

www.sunrisemedical.com/register or use the quick response

code below.

FOR ANSWERS TO YOUR QUESTIONS

Your authorized dealer knows your wheelchair best,

and can answer most of your questions about system

safety, use and maintenance. For future reference, fill in the

following:

Dealer: __________________________________________

Address: __________________________________________

_________________________________________________

Telephone: ________________________________________

Serial #:______________ Date/Purchased:_______________

INFORMATION YOU SHOULD KNOW

No component of this system was made with Natural Rubber Latex.

www.sunrisemedical.com/register

DISPOSAL AND RECYCLING INFORMATION

When this product reaches the end of its life, please take

it to an approved collection or recycling point designated

by your local or state government. This Seating system is

manufactured using a variety of materials. Your product

should not be disposed of as ordinary household waste.

You should dispose of your system properly, according to

local laws and regulations. Most materials that are used

in the construction of this product are fully recyclable.

The separate collection and recycling of your product at

the time of disposal will help conserve natural resources

and ensure that it is disposed in a manner that protects

the environment.
Ensure you are the legal owner of the product prior to

arranging for the product disposal in accordance with

the above recommendations.

248020 Rev. C

SEDEO PRO

Содержание 248020













































Результаты поиска

Содержание 248020

Отзывы:

Бренды по названию

Популярные бренды

Sunrise Medical 248020, Инструкция по эксплуатации

Результаты поиска

Содержание 248020

Отзывы:

Бренды по названию

Популярные бренды