Live
Neutral
Bypass
Reset
L
L
N
N
OUT
AC 100-240V
S
1
C
O
M
In-wall Smart
Switch
Ratings:100-240V,50/60Hz
MAX:1.4A ( )
MAX:4.8A ( )
Reset
L
L
N
N
OUT
AC 100-240V
S
1
C
O
M
In-wall Smart
Switch
Ratings:100-240V,50/60Hz
MAX:1.4A ( )
MAX:4.8A ( )
11. Setup a Zigbee Network & Add Other Devices to the Network (No Coordinator Required)
Step 1
: Short press “Reset.”
button 4 times (Or re-power
on the device 4 times) to
enable the device to setup a
zigbee network (connected
light flashes twice) to
discover and add other
devices, 180 seconds
timeout, repeat the operation.
Zigbee
Remote
< 10cm
TouchLink
10. Delete Learning to a Zigbee Green Power Remote
Step 1
: Short press “Reset.”
button 3 times (Or re-power
on the device 3 times) to start
delete Learning mode
(connected light flashes
slowly), 180 seconds timeout,
repeat the operation.
Zigbee
Green Power
Remote
Step 2:
Set the paired green
power remote into Learning
mode, please refer to its manual
.
Step 3
: Connected light will
flash 4 times to indicate
successful deleting.
Wiring Diagram
Notes for the diagrams:
L
- terminal for live lead
N
- terminal for neutral lead
Out
- output terminal of the switch (controlling connected light source)
S1
- terminal for switch (has the option of entering the device in inclusion/exclusion mode)
COM
- terminal for grounding to the switch connected to the switch
Compatible load types and recommended values of power for supported loads:
Supported load types
100-240V~
20-1000W @ 230V
20-500W @ 110V
Resistive loads
Conventional incandescent and
halogen light sources
Capacitive loads
Fluorescent tube lamp
(compact / with electronic ballast),
electronic transformer, LED
Inductive loads
Ferromagnetic transformers
(1) 2-Wire Connection With No Neutral Lead
The Bypass is a device designed to work with the in-wall smart switch. It should be used in case of connecting
LED bulbs or energy saving compact fluorescent lamps. The Bypass prevents flickering of the LED lights and
glowing of the turned off compact fluorescent lamps. In the case of 2-wire connection, the Bypass allows to
reduce minimum power of load required by the switch for correct operation. The Bypass provides powering of
the switch in case of controlling the low loads of minimum power down to 3W (for cos
φ>0.5).
PUSH
Live
Neutral
Bypass
NOTE:
Switch connected to the S1 terminal
activates the basic functionality of the switch
(turning the light on/off).
(2) 3-Wire Connection With Neutral Lead
PUSH
NOTE:
Switch connected to the S1 terminal
activates the basic functionality of the switch
(turning the light on/off).
Live
Neutral
Reset
L
L
N
N
OUT
AC 100-240V
S
1
C
O
M
In-wall Smart
Switch
Ratings:100-240V,50/60Hz
MAX:1.4A ( )
MAX:4.8A ( )
Reset
L
L
N
N
OUT
AC 100-240V
S
1
C
O
M
In-wall Smart
Switch
Ratings:100-240V,50/60Hz
MAX:1.4A ( )
MAX:4.8A ( )
No Bypass Used:
20-300W @ 230V
20-150W @ 110V
20-300W @ 230V
20-150W @ 110V
Using Bypass:
3-300W @ 230V
3-150W @ 110V
100-240V~
Live
Neutral
Bypass
Reset
L
L
N
N
OUT
AC 100-240V
S
1
C
O
M
In-wall Smart
Switch
Ratings:100-240V,50/60Hz
MAX:1.4A ( )
MAX:4.8A ( )
Supported external switch types (should be configured by factory setting):
1) Push switch
(default factory setting)
2) Normal On/Off switch
(should be configured by factory setting upon request)
3) 3-Way switch
(should be configured by factory setting upon request)
