The Bypass is a device designed to work with the knob smart dimmer. It should be used in case of connecting LED bulbs
or energy saving compact fluorescent lamps. The Bypass prevents flickering of the LED lights and glowing of the turned
off compact fluorescent lamps. In the case of 2-wire connection, the Bypass allows to reduce minimum power of load
required by the dimmer for correct operation. The Bypass provides powering of the dimmer in case of controlling the low
loads of minimum power down to 3W (for cos
φ>0.5).
Live
Neutral
Bypass
PUSH
Button
Multiple push switches wiring for multiple control points
PUSH
Button
PUSH
Button
(2) 3-Wire Connection With Neutral Lead
Live
Neutral
PUSH
Button
Single push switch wiring
Delete Startup Brightness
Step 1
: adjust the brightness of connected load
to 0%.
Step 2
: double click “Min. set” key to delete the previously set
startup brightness.
Notes for the diagrams:
L
- terminal for live lead
N
- terminal for neutral lead
- output terminal of the dimmer (controlling connected light source)
S
- terminal for push switch
Wiring Diagram
Controlled by a push switch:
Once connected with a push switch, click the push switch to switch ON/OFF, press and hold down it to increase/decrease
light intensity between 1% to 100%.
(1) 2-Wire Connection With No Neutral Lead
Live
Neutral
Bypass
PUSH
Button
Single push switch wiring
