4.4
Choose color by touching color wheel
After the receiver learned the ID, you can change each receiver's color by touching color wheel. If
you want to change the color of receiver NO.1.. Press button ,then make rotating touch on
color wheel by your figures, at this time, the color of receiver No.1 will be changed constantly ,
when your favorite color appears, stop rotating and leave the color wheel .
If you need change color of several receivers at the same, just choose a number for these several
receivers first, then touch color disc .For example, change color for receivers NO.1, 2 at the
same time, you need press number 1 to 2 button first, then touch the color wheel .
5.3
The usage of number button
5.3.1
Press on number button for choosing the corresponding receiver, E.g. to adjust the
brightness of receiver 1, you need to press 1 button , then press button or button to
adjust its brightness.
5.3.2
Pressing number button can turn on/Off the corresponding single receiver, E.g. If you need
to turn off receiver 1, press button more than 2 seconds, if you need turn it on again, please
press button again for more than 2 seconds.
Notice: If you turn off the extension by pressing the corresponding number button, you
must turn on this receiver in the same way, The receiver can not be switched on through
button ON/OFF.
4.5
Choose color changing mode
Selecting the mode button ,receiver change colors, there is 1 color changing mode.
If you want one or several receivers under color changing mode, press number button ,
and choose receiver number, then press button again. press of button , receiver will
pause change, the receiver will be paused, it will stay at one color. Press button again,
receiver will continue change, The receiver will be at one of static colors by touching the color
wheel in color changing modes. Then press button , receiver will be changed from start.
4.6
Brightness adjustment
Under the static color status or color changing status, you can adjust the brightness by press
button and pressing button to increase the brightness. The brightness is divided into 8
levels, the minimum is 10%, and the maximum is 100%.
4.7
Changing speed adjustment
Under color changing mode, you can slow down the changing speed by pressing button ,or
speed up changing speed by pressing button ,10 speed levels in total are available.
Attention: The receiver ID learned by touching color wheel is different from the reciever
that learned by pressing function button .The receiver ID learned by
touching color wheel that we define it as SLAVE receiver, the receiver ID learned by
pressing function button that we define it as MASTER receiver. The
purpose of learning these two kinds of receivers is to ensure the receivers and color
changing synchronously to avoid the color changing out of order. This point will be noted
later.
4.3
Delete ID and ID re-learning
If you need to delete the ID learned in the receiver, press ID learning button for more than 5
seconds, when learning indicator is off, then the learned ID is deleted. If you need the receiver
learn a new ID, repeat the operation of 4.2 (Receiver learning ID).
5.Expanded Usage
5.1
Color changing for multiple same ID receivers under same mode
One receiver of the sender can be learned (unrestricted) by multiple receivers, a receiver can be
only defined one ID No. from one sender .If one of senders is learned by several receivers, all
these receivers will share the same ID No. When all these receivers are changing color at the
same time, to ensure long-time changing in order, one of the receivers from this groups is needed
to be set as Master receiver and other receivers need to be set as Slave receivers. How to set
Master receiver and Slave receiver, please refer to 4.2(Receiver learning ID code.) Notice: Only
one receiver(Master) can be set amont a group of receivers, otherwise it may cause chaotic
phenomena.
When Master receiver is set, this group receivers are changing color at same time, synchronized
signal will be emited so as to ensure this group receiver will be in order no matter how long the
color changes and keep changing forever . For example, 10 receivers are learned to be ID 1. ,
these 10 receivers will change according to one mode, in order to avoid chaos of working units
after a long time, one of the receivers is needed to be set as Master ,the Master will launch
synchronized signal when color is changing, thus ensure this group of receivers are in good order
no matter how long the color is changing
5.2
Usage of ON/OFF
5.2.1
Press of ON/OFF button for turning ON/OFF receiver.
5.2.2
Press ON/OFF button for more than 2 seconds, it can reveal white light output, each
channel is 100% output.
6
.
Symptoms and solutions
6.1
The Receiver cannot be learned to the sender
Analysis:1.Exceed learning time, every learning time is 5Seconds only
2.Sender is under dormancy status
solution:1.Press receiver learning button
,
LED indicator is ON
,
press the number button before
led indicator is OFF
,
then press function button or touch color wheel
2.Press On/Off to make the sender under working status.
6.2
The sender cannot control the receiver
Analysis:1.Receiver isn't learned to the sender
2.The receiver isn't learned to the sender correctly
3.Remote distance is out of range
4.Incorrect receiver
solution:1. To learn the receiver by the sender
2.When receiver is learned to the sender, press number button first
,
then press function
button or touch color wheel
3.Shorten the remote distance
4.Choose correct receiver ID
6.3
Color changing isn't synchronized
Analysis:1.MASTER receiver isn't set.
2.More than two MASTER receivers are set.
solution:1. Reset a new MASTER receiver.
2.Relearn all the receivers with one Master receiver
6.4
Wrong color
Analysis:
Wrong connection of RGB(W) electric wires
solution: Reconnect RGB(W) electric wires
6.5
LED flashing
Analysis:
the power is not enough
solution: Change a higher power supply
7
.
Precautions
7.1
Don't fall the sender from a high place or don't squeeze it.
7.2
Please replace new batteries if there is a warning indicator of insufficient power, otherwise it
would cause damage to the sender..
7.3
Receiver is non-waterproof, not for outdoor use
