www.sunred.nl
Operation
Connect the power cable to a 230V, 13 amp supply that is located in a safe, dry area.
•
The
Pull-Switch
is used to control the power of the appliance.
•
Once the power is on, the
Pressing Button
on the heater is used to control the heat setting
and LED light.
Press the button once to operate the heater on 1500W power.
Press the button twice to activate the LED lighting without heat.
Press the button three times to activate the LED lighting, and operate the heater.
Press the button four times to turn off the LED lighting and heater.
The
Remote control
is also used to control the heater and LED light. The left button
represents LED light. And the right button represents heater.
Although the patio heater is shower proof, do not use when raining or in wet conditions.
•
Always disconnect the power cable from the electrical supply, when the patio heater is not in
use.
Care and maintenance
•
When disconnected from the electrical supply, clean the outside of the patio heater with a
damp cloth. Never use corrosive or solvent cleaners or immerse in water.
•
Any maintenance or repairs including replacing the halogen tube should only be carried out by
a qualified electrician or by a recommended service center.
Technical specification
•
Power supply 230V, 50Hz
•
Wattage max 1500W
•
Net weight 3.0 kg
•
Insulation class I
