文件编号
Document No.
：
SP/WI-JS-010
- 5 -
（
14
）
Each individual module has a unique serial number laminated behind the glass and another
permanently attached to the back-sheet of the module,The last one is on the aluminum frame on the side of the
module. Note all serial numbers in an installation for your future records.
每个单独的组件在玻璃后面都有一个唯一的序列号，另一个永久连接到组件的背板上
,
最后一个在组件侧面铝框上。
记下安装中的所有序列号以备将来记录。
3.1
、
MAKERS ON OUTER PACKAGING
包装标示说明
3.1.1 Need both hands to handle it carefully.
需要双手小心操作
3.1.2 Uninstalled modules must be kept dry, not
expose to rain or moisture.
禁止未安装的组件淋雨或者受潮
3.1.3 Modules in carton are fragile, which must be
handled with care.
纸箱中的组件为易碎物品，搬运时应小心轻放
3.1.4 The packaging must be transported upright.
包装在运输时应竖直向上
3.1.5 Do not step on the package and module.
禁止在包装箱和组件上面踩踏
3.1.6 Modules shall be stacked as required, not
exceeding the maximum number of layers printed on
the outer packaging. (no more than two layers).
堆叠组件时请勿超过外包装箱上印刷标志的最高层数限
制（最多堆码
2
层）
3.1.8 One module shall be handled by at least two persons together. Modules are placed vertically.
一块组件至少需由
2
个人同时搬运，组件是竖直放置
