14
6.Depth Indication
The depth indication is accurate for coin-sized objects. Large
objects or irregularly-shaped objects will yield less reliable depth
readings. It is the accurate detection if you scan in the same place
for several times and the detector shows the same depth. If the
depth indication varies, trying to change the angle of sweeping.
There may be more than one target presenting.
7.PINPOINT(P/P mode)
When detecting in the motion mode(A-M and DISC), it is not easy
to locate the exact position and digging is difficult because you
have to keep moving the search coil, even though you find the
area where the metal is buried. At this time, you should use the
PINPOINT mode. (See Pic13)
Pic13
30
20
10
40
0
50 60 70 80 90
2
4
6
8
①
Press the PINPOINT button, the PINPOINT cursor is lighted,
the depth cursor will be full scale, and the detector will sound a
low single-frequency tone, the sensitivity is in the highest state.
②
Let the search coil approach the ground, move the search coil
slowly in the region where you find the target. When the single
frequency tone becomes louder, continuing moving the search
coil until the sound turns louder, and the depth cursor is full of
scale.This shows that you have locked the approximate location of
the target.
