4
o
While operating in Cool Air / Humidifying mode, when the water tank reaches half point,
the unit will beep to warn you that the water tank is half empty. The red indicator light
remains on and the unit continuous running.
o
To prevent damage to the water pump, when operating the unit without water, please keep
the Cool Air / Humidifying function OFF. The unit will operate as a normal electric fan.
6. WATER FILLING INSTRUCTIONS
o
Please be sure the power is OFF before filling water.
o
Fill the water tank by pouring water and adding ice into the Ice & Water Inlet.
o
Amount of water added can be seen from the water indicator located at the bottom front.
o
Make sure the water indicator indicates the water level is above “EMPTY”.
o
Pour in 2/3 of water (6 Liters) and 1/3 of ice (3 Liters) for best cooling effect.
o
You can also put some ice or ice packs in the “Ice Box” located on the top of the unit for
extra cooling (optional).
o
DO NOT add more than 10 Liters of water into the water tank. The water indicator
should never rise above “Maximum” or the water tank will overflow.
NOTE: When operating the unit for the first time, please add water to the Maximum
level.
Specifications
Model
Rated
Voltage
Rated
Frequency
Rated
Power
Water
Consumption
Water Tank
Capacity
Speed
Dimensions
N.W.
SF-608R
~120V
60Hz
60W
0.6-0.7L/h
10L
7m/s
15.4”x11.8”x25.2” 16.51bs
Circuit diagram
Maintenance
Cleaning the filter net and water tank
To ensure best humidifying and purifying effect, please clean the filtration system once a week.
1. Cleaning the filter, pull filter upwards for opening slot.
2. Remove the photo-catalysis filter (small black filter).
It should be
put in the sun
(Figure1)
(Figure2)
(Figure3)
(Figure4)
Pull out
connecting sticks
N
L
L
N
