Sunpak 6600PG Скачать руководство пользователя страница 2

Height Adjustments 

Your Sunpak 6600PG tripod is equipped with a 
Geared Center Column and Elevator Crank Assembly 
for precise height adjustments. 
 
To raise or lower the Center Column, loosen the  
Center Column Lock Knob (1).  Turn the Elevator 
Crank Assembly Knob (2) clockwise until you reach 
the desired height.  Retighten the Center Column 
Lock Knob 
to secure.  
 

Note: 

Never 

release your    
camera until 
the Center 
Column 
Lock Knob is 
securely 
retightened. 

 

Specifications

 

Maximum Height: 

 

66.3”  (168.3 cm) 

Minimum Height: 

 

25.3”  (64.1 cm) 

Folded Length:                

26.3”  (66.7 cm) 

Weight:  

 

 

4.1 lb  (1.9 kg) 

Load Capacity:   

 

6.6 lb  (3 kg) 

Leg Diameter:   

 

1”        (25.4 mm) 

Leg 

Sections: 

  3 

Quick Release Plate 

Move the Quick Release Locking Lever outward 
and remove the Quick Release Plate by lifting    
upward. The plate has a threaded ¼” - 20 camera 
mounting screw for camera attachment. 
 
 
 
 
 
 
 
 
Position the Quick Release Plate so that the     
camera mounting screw aligns with the matching 
receptacle on your camera or camcorder and     
attach, using the camera mounting screw.  Move 
and hold open the Quick Release Lock Lever and 
with the camera tilted slightly down, slide the Quick 
Release Plate back into position. After doing so, 
secure the Quick Release Plate  using the Quick 
Release Locking Lever by pressing firmly until it 
stops. 

Using the Pistol Grip Ball Head 

For movement in any direction, simply loosen the 
Pistol Grip Ball Head, by squeezing the Trigger  
Control Lock.  When you have reached your de-
sired position, simply release the trigger lock and 
the Pistol Grip Ball Head will lock into place.  The 
Pistol Grip Ball Head can rotate to 360° in any 
direction.

 

Extending the Legs

 

To extend, flip open the Flip Lever Leg Locks and 
gently pull on the leg segment to the desired length. 
To secure in position, press the leg lock lever until it is 
locked.   Not properly securing a  leg lock may cause 
the tripod leg to retract unexpectedly and result in 
damage to your 
camera and tri-
pod). 
 

Leg Spikes 

For indoor use, 
rotate the rubber 
feet to retract the 
leg spikes.  For 
outdoor use and 
surfaces where 
leg movement is 
a problem, rotate 
the rubber feet 
clockwise to expose the leg spikes. Be sure to retract 
the leg spikes when used indoors or on surfaces that 
can be damaged. 

Tripod Components 

1.  Quick Release Plate 
2.  Quick Release Lock Lever 
3.  Pistol Grip Ball Head with Quick Release  
4.  Trigger Control Lock 
5.  Elevator Crank Assembly 
6.  Geared Center Column 
7.  Flip Lever Leg Lock 
8. Leg 

Brace 

9.  Rubber Foot with Retractable Spike 
 

Отзывы: