SUNON S-RF1, Инструкция по эксплуатации

Страница: 3 / 5

2
Button
Function
1-6
Press each button to turn on the fan then
you can set up the air volume. The
number stands for air volume from low to
high in numerical order (1 lowest to 6
highest volume).
0
Press the button to turn off the fan
Press the button to switch the fan
direction, when the fan :
Ventilation: airflow move upwards.
Reverse: airflow move downwards.
Press this two button at same time to
enter pairing process. After pairing
process is completed, direction of the fan
will
be initialized to ventilation
(Downward airflow).
Remote Control Pairing
- Only needed for first time setup
- A fter turn on the power, it must enter the pairing process in
one minute
- If you fail to pairing, please turn off the power and restart
above process 5 minutes later
Battery installation
-Remove the battery cover and install 2 AAA batteries.
-Remove the batteries when not used for a long time. Please recycle the used
batteries.
Operating Instructions
1. Make sure the fan blades are standstill before you turn on the fan every time.
2. Press 0 to turn off the fan, DO NOT touch the fan and fan blade once its
standstill.
3. Once you press any buttons, the fan will receive the final order and spin direction.
DO NOT touch the fan and blades during the procedure.