8171136
04/2020
Wick Replacement
1.
Carefully remove the wick from the flame guard and properly
dispose of the wick in accordance with local laws and
regulations.
2.
Insert the new torch wick (Figure 7) and position the
wick with 3/4 inch of the wick exposed.
3.
If the wick is too long to fit properly in the vessel, trim the
wick as needed.
Storage
1.
Store fuel in the original fuel bottle with the cap secured.
2.
Dispose of any unwanted fuel in accordance with local laws and regulations.
3.
Disassemble pole sections and/or other installation components before storing them.
4.
Store torches in an upright position in a dry location (Figure 8).
5.
Store in a dry, indoor location when not in use. Avoid leaving torches out during
inclement weather as it may cause the metal components to rust.
Cleaning
1.
When not in use, use a damp cloth to remove debris from the torch components as needed.
Figure 7
Figure 8
