TF-9775
ASSEMBLY
2
Page 2 / 3
Assembly Tip:
Ensure all parts and
hardware align correctly before fully
tightening the lock nuts.
1. Align Base Back (A), Base Front
(B), Top Base Connector (E),
and Bottom Base Connector (F).
Secure base parts using Bolt
(G) and Washer (H). Tighten the
hardware using the Small Hex
Key (X). Place Bolt Cap (I) on top
of the bolts.
2. Carefully snap Foot (J) evenly
onto the stand base, as shown.
3. Slide Straight Pole (C) into Base
Back (A) and align the holes.
Secure the pole using Bolt (M),
Washer (L), and Lock Nut (N).
Tighten the hardware using Large
Hex Key (Y) and Spanner (Z).
Place Hex Nut Cap (O) over the
lock nut.
4. Slide Curved Pole (D) onto
Straight Pole (C) and align the
holes. Secure the poles using Bolt
(K), Washer (L), and Lock Nut
(N). Tighten the hardware using
Large Hex Key (Y) and Spanner
(Z). Place Hex Nut Cap (O) over
the lock nut.
F
1
3
M
L
N
O
Y
Z
4
K
L
N
O
Y
Z
J
1
I
G
E
H
X
J
A
B
C
D
07/2020
