09/2019
MZ14871BB
Page 1 / 2
FLORAL MOTIF CERAMIC 3-TIER OUTDOOR WATER FOUNTAIN
WITH LED LIGHTS
SSS-399
Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference.
Select a smooth, level surface to place the fountain.
Assemble components of this fountain on a soft, clean surface to avoid scratching or damaging the finish.
*
2 people are recommended to safely assemble this product.
Parts
Qty.
Ball Topper
1
Small Tier with LED Light Ring
1
Medium Tier with LED Light Ring
1
Large Column
1
Large Tier with
Electric Submersible Pump
1
AC Adapter
1
Pedestal
1
Water Tube
1
Rubber Washer
1
ASSEMBLY
1. Place the large tier with the built-in electric submersible pump onto the pedestal and twist the tier clockwise
to lock into place.
2. Run the long pump power cable through the tube in the large tier and through the pedestal. Pull the cord out
through the groove in the back-side of the pedestal.
3. Assemble the water tube and attach it onto the pump making sure the end with the rubber washer is on top.
Remove the rubber washer and save it for use during Step 7.
4. Slide the large column over the water tube and gently place the large column onto the large tier. Run the
light splitter cable (attached to the pump) up through the large column.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we
sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof
of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
Photos are used to determine the cause of defects and for future quality control. Register your warranty at
www.serenityhealth.com/warranty/
If you have any questions, comments or concerns, feel free to contact us by phone at
888-881-4668
, by email:
, or via our contact us page at
www.SerenityHealth.com/contact-us/
Purchase Date: / / Order/Customer Reference Number:
Inspect packaging to ensure all parts are accounted for
before disposing of packaging.
NOTE:
There is a polyurethane foam filter/splash guard inside the ball topper;
this filter helps control water flow to prevent splashing. Do not remove or discard
this filter/splash guard.
