Page 2 / 3
ASSEMBLY
Read carefully and understand assembly before beginning.
Do not fully tighten bolts until all components have been loosely assembled.
A1
B
D
C
E
A2
60mm
60mm
60mm
60mm
60mm
60mm
60mm
60mm
35mm
35mm
45mm
45mm
45mm
45mm
• Insert 4x Barrel Nut into Back Panel (E). Use the Barrel
Nut Driver (4) to align the barrel nut with the hole on the
outside of the panel.
• Loosely attach Right Side Panel (A1) by hand-tightening 2x
60mm Bolt (1), ensuring the bolt threads into the barrel nut.
• Loosely attach Left Side Panel (A2) by hand-tightening 2x
60mm Bolt (1), ensuring the bolt threads into the barrel nut.
STEP 1
A1:
1
A2:
1
E:
1
1:
4
STEP 2
D:
1
1:
4
STEP 3
C:
1
3:
2
STB-300
STEP 4
B:
1
2:
4
• Insert 4x Barrel Nut into Front Panel (F). Use the Barrel
Nut Driver (4) to align the barrel nut with the hole on the
outside of the panel.
• Loosely attach Right Side Panel (A1) by hand-tightening 2x
60mm Bolt (1), ensuring the bolt threads into the barrel nut.
• Loosely attach Left Side Panel (A2) by hand-tightening 2x
60mm Bolt (1), ensuring the bolt threads into the barrel nut.
• Affix Seat (C) to the backside of the side panels
by hand-tightening 2x 35mm Bolt (3).
• Align Backrest (B) with the side panels.
• Secure the backrest using 4x 45mm Bolt (2).
• Tighten all hardware using Hex Key (5). Do not
over-tighten, as doing so may damage the wood.
05/2020
