are connected properly.
ASSEMBLY PICTURES
ASSEMBLY INSTRUCTIONS
DO NOT allow the pump to run dry!
Be careful not to spill water onto the plug of the pump.
Fig 1
Fig 2
Fig 3
Fig 6
Step 1: Place the base pedestal and the basin on a level surface. route the pump’s power cord downwards through
the resin tube in large basin. Lay the pump in the bottom of the basin.And then route the pump’s power cord
through the base pedestal, the cord exits through the slot in the bottom of base pedestal.,Lastly align the basin with
base pedestal, insert the large basin and twist clockwise to lock in place securely. (pls refer to the fig. 1,2,3,4)
Step 2: Route the water tube of the assembled topper downwards through the assembled large basin. Connect the
water tube to the outlet nozzle of pump.also conect the LED light conection to the pump connection, Make sure the
connection is tight.insert the assmbled topper and lock in place securely. (pls refer to the fig.5,6)
Step 3: Fill the large basin and small basin with water. Make sure the pump is completely submerged in water.
Step 4: Plug the pump power cord to the wall outlet to run the fountain.
Fig4
Fig5
Содержание LZH-179
Страница 3: ......
