ASSEMBLY PICTURES
ASSEMBLY INSTRUCTIONS
DO NOT allow the pump to run dry!
Be careful not to spill water onto the plug of the pump.
Fig 1
Fig 2
Step 1: Place the base pedestal and the basin on a level surface. route the pump’s power cord downwards through
the resin tube in basin. Lay the pump in the bottom of the basin.And then route the pump’s power cord through the
base pedestal, the cord exits through the slot in the bottom of base pedestal.,Lastly align the basin with base
pedestal, insert the basin and twist clockwise to lock in place securely. (pls refer to the fig. 1,2,3,4)
Step 2: Route the water tube of the topper downwards through the assembled large basin. Connect the water tube
to the outlet nozzle of pump. Make sure the connection is tight.insert the assmbled topper and twise clockwise to
lock in place securely. insert the bird to the hole in the rim of basin (pls refer to the fig.5,6)
Step 3: Fill the large basin and small basin with water. Make sure the pump is completely submerged in water.
Step 4: Plug the pump power cord to the wall outlet to run the fountain.
Fig4
Fig5
Fig 3
Fig 6
Содержание LZH-148
Страница 3: ......
