LARGE TIERED BALL
OUTDOOR FOUNTAIN
FC-73803
Read the assembly instructions carefully and follow the care instructions.
Keep these instructions for future reference.
Select a smooth, level surface to place the fountain.
Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
73803
Page 1 / 2
Purchase Date: / / Order/Customer Reference Number:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at
888-881-4668
, by email:
, or via our contact us page at
https://tiny.cc/SunnydazeContact
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Parts
Qty.
Fountain Topper
1
Top Tier
1
Small Column
Second Tier
1
Middle Column
1
Third Tier
1
Bottom Column
1
Basin Tier
1
Pedestal
1
Electric Submersible Pump
1
EVA Stopple
1
Pump Access Cover
1
2-PERSON ASSEMBLY
RECOMMENDED
ASSEMBLY
1. Place the Basin Tier onto the Pedestal and twist to lock into place.
2. Run the pump power cord through the tube in the Basin Tier and
pedestal. With the power cord in the middle of the EVA Stopple, push
the stopple into the top of the tube in the Basin Tier. Pull the power
cord out through the groove on the bottom of the pedestal.
3. Ensuring the pump is touching the bottom of the Basin Tier, Place the Bottom Column onto the Basin Tier
and twist to lock into place.
4. Place the Third Tier onto the Bottom Column and twist to lock in place.
5. Run both of the tubes that are attached to the Fountain Topper through the Top Tier, making sure the tubes
do not kink. Twist the topper onto the Top Tier to lock the pieces together.
6. Run both tubes through the Small Column and twist onto the Top Tier to lock into place. Continue running
the tubes through the Second Tier and twist to lock in place.
7. Feed both tubes through the Middle Column. Twist the middle column onto the Second Tier to lock in place.
NOTE:
The smaller tube is designed to hang freely (unattached) inside the fountain, within this section of
the fountain.
06/2020
NOTE:
The water tubing is built into the fountain topper. Take care when handling the water tube;
detaching the water tube from the fountain will damage the fountain and void the product warranty.
