Cleaning and Maintenance
Any electrical repairs or rewiring of this unit must be carried out by a licensed electrician
in accordance with national and local codes.
06/2020
BGP1401-15T
Page 6 / 6
•
Before cleaning the appliance, disconnect it from the power outlet and let it cool down.
• In order to protect the enclosure, don't splash water onto the heater, and never use a solvent like gasoline,
isoamyl acetate, toluene, etc. to clean the heater.
DO NOT
open the heater or attempt to clean the inside of
this appliance.
Specifications
Model
BGP1401-15T
(All specific5% / -10% tolerance)
BTU's per/hour
5120
Voltage
120V
Watts
1500
Amps
15
Heating Area (m
2
)
15
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, or neglect of this product.
Any modification to the product or failure to follow recommended care will void the product warranty.
Troubleshooting
Problem
Possible Cause
Solution
Do not feel heat or air flow
No power to heater
Check power connection to heater
Desired room temperature has
been reached
Thermostat will shut heater off once desired
room temperature has been reached
Auto-Reset has tripped
Unplug heater and allow it to cool down for
at least 10 minutes before restarting
Heater has fan only setting
Set to run on full power for heating