1. The unit can be installed on leveled ground or hung up.
2. Install properly and securely to prevent accidents that could cause damage to the
unit or other people and property.
3. Press and hold the ON Switch for about 3 seconds. Both emergency lamps will
illuminate and the LED ON light on the unit will turn on indicating that the unit is
operational.
4. Plug the unit into a power socket with a 220Vac power supply. The emergency lamp
will remain on for about 5 seconds before turning off.
5. The AC LED light will show if the unit is receiving power from the power socket.
The Charge/Full LED will blink if the battery is charging and will remain on when the
battery if fully charged.
6. When the user is ready to put the unit into operation, the user can test the unit using
the Test button. The lamp on the unit will turn on for 5 seconds and then turn off.
After the test the unit will return to its normal operation mode.
1. Always press the “ON” switch every time after installation to turn on the unit.
2. When the unit is not in use always turn it off by pressing the “OFF” switch.
3. The unit should be installed indoors away from direct sunlight and rain or moisture.
4. The unit should be stored in temperatures under 25 Degree Celsius and the battery
should be charged every 3 months to maintain its operational life.
Installation and Operation
Important Note on Using the Unit
