10
METER INSTRUCTIONS
FUNCTION BUTTONS
MODE:
Press the Mode button to select the function displayed. Press
and hold the Mode button for 3 seconds, all the function values except
Odometer will be reset to zero.
SET:
To set up the target value of Time, Distance, and Calories. You
can hold the button to increase the value fast. (No motion should be
detected at the time of setting).
RESET:
Press the button to reset Time, Distance, and Calories.
Press and hold the Reset button for 3 seconds, all the function values except Odometer will be
reset to zero.
FUNCTIONS AND OPERATIONS
1. BATTERY INSTALLATION:
Please install 2 pieces of AA 1.5V batteries in the battery case on the back of monitor.
(When batteries are removed, all the functions values will be reset to zero.)
2. AUTO ON/OFF:
While the user starts to exercise, the meter will show the workout value automatically. When
inactive for over 4 minutes, the meter will turn off, but the workout value of odometer will be
held. When the user starts to exercise again, the workout value on the odometer will
accumulate continuously.
3. AUTO SCAN:
After the meter is powered on or the Mode button is pressed, the LCD will display all
functions values from Time-Calories-Odometer-Pulse-Speed-Distance. Each value will be
held for 6 seconds.
4. SPEED:
Displays the current training speed from 0.0 to 99.9 MPH. The user also can press Mode
button to display the Speed value.
5. DISTANCE:
Displays the trip distance from 0.0 to 999.9 Miles. The user also can press Mode button to
display the distance value. Press the Mode and Set button to preset Distance.
