6
BATTERY INSTALLATION AND REPLACEMENT
If the meter display is not clear, try replacing the battery. The stepper uses 1 x 1.5V AAA
battery.
To replace the battery, use the notch that is next to the button and gently pull the meter up
slightly to loosen. Carefully pull the meter out all the way. Change the battery. Put the meter
back into the stepper. Dispose of old battery according to your state and local guidelines.
METER FUNCTIONS
Press the button to select a function.
SCAN
Automatically displays each function in sequence for a few seconds each.
TIME
Counts from 00:00 up to 99:59 in one-second increments.
CALORIES
Accumulates the calories burned during your exercise. This is a rough guide
and should only be used as a comparison figure over several exercise
sessions.
COUNT
Accumulates the numbers of strides during a workout session.
Meter counts 1 stride after you step once with each foot.
STRIDES/MIN
Displays strides per minute.
NOTE:
1.
To turn on the power, press the button or start exercise.
2.
After 4 minutes of inactivity, the meter will turn off automatically.
3.
To reset the values, press and hold the button for 3 seconds.
Version 1.2
Содержание SF-S0636
Страница 4: ...3 EXPLODED DIAGRAM ...
