3) Install the Front Upright Frame
Put the cable end of the resistance cable for the Tension control (10) into the spring hook of
Tension control wire (6) as shown on drawing
A
of figure 3. Pull the resistance cable for the
Tension control (10) up and force it into the gap of metal bracket of Tension control wire (6) as
shown on drawing
B
of figure 3. Connect the resistance cable of Tension control (10) with the
Tension control wire (6) completed as shown on drawing
C
of figure 3. Insert the Computer wire
(60) and Sensor wire (55) from the Main frame (1) through into the bottom of Front upright tube
(11) and then pull them out from the top hole of Front upright tube (11). Insert the Front upright
tube (11) into the tube of Main frame (1) and secure it with four M8×20 Bolt (42) and Arc washers
(33) as shown on drawing
D
of figure 3.
4) Install the Computer
Connect the Computer wire (60) and Sensor wire (55) to the wires that come from the Computer
(19). Attach the Computer (19) to the top of Front upright tube (11). (See figure 4)
5) Install the Seat Cushion Frame
Attach the Seat cushion frame (3) to the Seat cushion adjustor (2) with four M8×20 Bolt (42), Flat
washers (37), and Nylon nut (56). (See figure 5)
7
Содержание SF-RB801
Страница 1: ......
Страница 6: ...4 Overview Drawing 5 ...
