32
33
32
33
32
11
11
11
35
36
34
65 S6 1PC
14B
14B
35
36
34
13
Fig.2
40
STEP 2:
IMPORTANT:
Turn the
Tension Control Knob (No. 14A)
all the way to the left (the lowest
level of resistance). This provides the tension cable with the necessary length required to
connect it.
Unscrew the 4
Screws (No. 32),
4
Spring Washers (No. 11)
and 4
Arc Washers (No. 33)
preassembled on
Main Frame (No. 40)
with
Allen Wrench S6 (No. 65).
Connect the
Upper Sensor Wire (No. 34)
to the
Lower Sensor Wire (No. 36)
as
shown
above in
Fig. 1
.
Lower the
Upper Tension Wire (No. 14B)
from the
Handlebar Post (No. 13)
and connect
it to the
Lower Tension Wire (No. 35)
, following the tension cable assembly shown above
in
Fig. 2
.
Attach the
Handlebar Post (No. 13)
to the
Main Frame (No. 40)
using 4
Screws (No. 32),
4
Spring Washers (No. 11)
and 4
Arc Washers (No. 33)
, tighten and secure with
Allen
Wrench S6 (No. 65)
.
8