4
ASSEMBLY INSTRUCTIONS
STEP: 1
Open the box and remove the
Main Frame (No. 2)
. Unfold the main frame so that it
matches the position of the drawing shown above. Next, align the holes on the securing
points of the main frame (as shown above) and fix by inserting the
Locking Pins (No.
6)
.
STEP: 2
Raise the back support upward. Use the holes located on the
Main Frame (No. 2)
(shown above), to select the desired position/angle of the back support, once
determined secure it in place using the
Adjustment Pin (No. 7)
.
NOTE:
The
Adjustment Pin (No. 7)
is used to secure the back support into a fixed
position/angle.
LOCKING PIN
6
6
