18
DISMOUNTING THE BIKE
WARNING! Do not dismount the bike or remove your feet
from the pedals until the pedals have stopped completely.
You can stop the flywheel at anytime by pushing down on
Brake Knob (No. 31)
.
ADJUSTING THE HANDLEBAR
Loosen the
L Shaped
Knob (No. 16)
to raise or lower the
handlebar to the desired position. Make sure the
L Shaped
Knob (No. 16)
settles into the desired hole and secure it
firmly by turning
clockwise
. See
Figure A
.
Loosen the
L Shaped Knob (No. 27)
to move the handlebar
forward or backward to the desired position. Once the
handlebar is in the desired position, firmly secure the
L
Shaped Knob (No. 27)
by turning
clockwise
. See
Figure B
.
ADJUSTING THE PEDAL STRAP
Place the ball of each foot in the toe clips so the front of your
shoe fits snugly in the toe clip cage. Rotate one foot to within
arm’s reach and pull the strap until the top clip cage fits your
shoe snugly. Insert the strap back into the hoop of the toe
clip. Repeat this for the other foot.
MOVING THE BIKE
To move the bike, first ensure that the handlebar is properly
secured. If the handlebar is loose, tighten the
L Shaped
Knobs (No. 16 & 27)
to secure it. Next, stand at the front of
the bike so that you’re directly in front of the handlebar.
Firmly grasp and hold each side of the handlebar, place one
foot on the front stabilizer and tilt the bike towards you until
the transportation wheels on the front stabilizer touch the
ground. With the wheels on the ground, you can transport
the bike to the desired location with ease.
Содержание SF-B1913
Страница 5: ...4 EXPLODED DIAGRAM 1 ...
Страница 6: ...5 EXPLODED DIAGRAM 2 ...
Страница 47: ...46 ...
Страница 48: ...47 ...