background image

 

 

IMPORTANT SAFETY INFORMATION 

 
We  thank  you  for  choosing  our  product.  To  ensure  your  safety  and  health,  please  use  this 
equipment  correctly.  It  is  important  to  read  this  entire  manual  before  assembling  and  using  the 
equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, 
and used properly. It is your responsibility to ensure that all users of the equipment are informed of 
all warnings and precautions. 

 

1. 

Before  starting  any  exercise  program,  you  should  consult  your  physician  to  determine  if  you 
have any medical or physical conditions that could put your health and safety at risk or prevent 
you  from  using  the  equipment  properly.  Your  physician’s  advice  is  essential  if  you are  taking 
medication that affects your heart rate, blood pressure, or cholesterol level. 

2. 

Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop 
exercising  if  you  experience  any  of  the  following  symptoms:  pain,  tightness  in  your  chest, 
irregular  heartbeat,  shortness  of breath,  lightheadedness,  dizziness,  or  feelings  of  nausea.  If 
you do experience any of these conditions, you should consult your physician before continuing 
with your exercise program. 

3. 

Keep children and pets away from the equipment. The equipment is designed for adult use only. 

4. 

Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. 
To ensure safety, the equipment should have at least 2 feet (60 CM) of free space all around it. 

5. 

Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of 
the equipment can only be maintained if it is regularly examined for damage and/or wear and 
tear. 

6. 

Always use the equipment as indicated. If you find any defective components while assembling 
or checking the equipment, or if you hear any unusual noises coming from the equipment during 
exercise, discontinue use of the equipment immediately and do not use until the problem has 
been rectified. 

7. 

Wear  suitable  clothing  while  using  the  equipment.  Avoid  wearing  loose  clothing  that  may 
become entangled in the equipment. 

8. 

Do not place fingers or objects into the moving parts of the equipment. 

9. 

The maximum weight capacity of this unit is 220 pounds (100 KG). 

10. 

The equipment is not suitable for therapeutic use. 

11. 

To avoid bodily injury and/or damage to the product or property, proper lifting and moving are 
required. 

12. 

Your product is intended for use in cool and dry conditions. You should avoid storage in extreme 
cold, hot or damp areas as this may lead to corrosion and other related problems. 

13. 

This equipment is designed for indoor and home use only; it is not intended for commercial use. 

 

 
 
 
 

 

 

 

 

Содержание P8300














Отзывы: