8
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [email protected] or 1-877-90SUNNY
(877-907-8669).
STEP 3:
Remove 6
Screws (No. 70)
, 4
Washers
(No. 45)
，
2
Big Arc Washers (No. 25)
and 6
Spring Washers (No. 17)
from the
Main Frame (No. 1)
with
Allen Wrench
(No. 121)
.
CAUTION:
Please make sure the
Tension
Control Knob (No. 75)
is at the lowest
resistance level (level 1, all the way to the
left) before you connect any wires together.
Attach the
Tension Control Wire (No.
75a)
into the metal bracket of
Tension
Wire (No. 71)
as shown in drawing A
.
Then, pull
Tension Control Wire (No.
75a)
upward and insert it into the slot of
metal bracket of
Tension Wire (No. 71)
as
shown in drawing B
.
Make sure the metal
fitting on
Tension Control Wire (No. 75a)
is secured in the metal bracket.
Connect the
Extension Sensor Wire (No.
73)
with
Sensor Wire (No. 72)
. Insert the
connecting wires
into
Front Post (No. 4).
Attach the
Front Post (No. 4)
to the
Main
Frame (No. 1)
with 6
Screws (No. 70)
, 4
Washers (No. 45)
,
2
Big Arc Washers
(No. 25)
and 6
Spring Washers (No. 17)
that were removed. Tighten and secure
with
Allen Wrench (No. 121)
.
NOTE:
Be careful not to pinch any wires
when attaching
Front Post (No. 4)
to
Main
Frame (No. 1).
