5
ASSEMBLY INSTRUCTIONS
STEP 3:
Pull
Wire (No. 1c)
out from the
Main Frame (No. 10)
and connect it to
Remove the preassembled 5
Washers
the
Connecting Wire (No. 1b)
.
(No. 4)
and
5
attach the
Bottom
Bolts (No. 8)
from the
Bottom Stand Post (No. 7)
and
Stand Post (No. 7)
to the
Main Frame (No. 10)
using 5
Washers (No. 4)
and 5
Bolts (No. 8)
, tighten and secure with
Allen Wrench (A)
STEP 4:
Pull the
Connecting Wire (No. 1b)
from the
Bottom Stand Post (No. 7)
.
Take the wire from the
Meter (No. 1)
and insert it through the small hole
located on the top end of the
Top Stand Post (No. 5)
as shown in the
picture on the left side below. Next, carefully insert the
Meter Wire
(No. 1a)
(No. 5)
(No. 7)
(No. 1b)
through the
Top Stand Post
and connect it to the
Connecting Wire
atop of the
Bottom Stand Post
.
1c 1b
10
7
7
7
1b
1a
1
1
1a
1b
5
5
7
small hole
#8 M8 5pcs
#4 5pcs
A
