EG320/340 EVERGEN EMS RETROFIT USER MANUAL
INSTALLATION
10
by carmanah
®
Sol by Sunna Design | 990 Biscayne Boulevard, Office 701, Miami, FL 33132, USA | 1.800.959.1329 | [email protected]
17. Battery Harness Installation
1
2
While at ground level, install battery cable(s) to battery terminals following the color coordinated terminal
ends.
If installed, remove fuse from fuseholder.
CABLE CONNECTIONS VARY DEPENDING ON SYSTEM CONFIGURATION.
In highly corrosive environments, coat all fasteners and ring terminals with
dielectric grease.
N
NOTE
OTE
N
NOTE
OTE
3
Place the negative (-) wire (BLACK) ring terminal onto the negative (-) terminal of the battery.
4
5
6
7
Apply grease and thread supplied bolts, washers, and lock washers into battery terminal then torque to
50 in-lbs.
Place the positive (+) wire (RED) ring terminal onto the positive (+) terminal of the battery.
Apply grease and thread supplied bolts, washers, and lock washers into battery terminal then torque to
50 in-lbs.
Install terminal covers.
+
-
BLACK
RED
FUSEHOLDER
MAIN BATTERY HARNESS
(2-BATTERY VERSION SHOWN)
!CAUTION!
RISK OF ELECTRICAL SHOCK
IF CONTACTS ARE SHORTED
!GREASE!
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
TITLE
B
1:16
-
MANUAL IMAGES, EVERGEN
2 OF 5
82064-1
SHEET
SIZE
REVISION
SCALE
DRAWING NO
CAD REFERENCE
Carmanah Technologies Corp.
250 Bay Street
Victoria, BC Canada V9A 3K5
Tel [250] 380-0052
Fax [250] 380-0062
CHANGES SHALL BE INCORPORATED
ELECTRONICALLY BY THE DESIGN AUTHORITY
PDM MAINTAINED DATA
COPYRIGHT © 2012 BY
Carmanah Technologies Corp. Victoria, BC, Canada
ALL RIGHTS RESERVED. NO PART OF THIS
DOCUMENT MAY BE REPRODUCED STORED IN A
RETRIEVAL SYSTEM, OR TRANSMITTED IN ANY
FORM, WITHOUT THE WRITTEN PERMISSION OF
Carmanah Technologies Corp.
PROPRIETARY
ORIGINALLY DESIGNED BY
ORIGINALLY DRAWN BY
CHECKED BY
DATE
DATE
DATE
Ben Jolie
Ben Jolie
05/29/2017
05/29/2017
UNLESS OTHERWISE SPECIFIED
DO NOT SCALE DRAWING
INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.100-2000
TOLERANCES APPLY AS SHOWN BELOW
DECIMALS SURF FINISH ANGLES
.X
.XX
.XXX
.XXXX
± .1
± .01
± .005
± .0005
63
1
INCHES
THIRD ANGLE PROJECTION
DOC #
DATE
21/12/11
57012
B
DOC REVISION
82064-1
ALL COMPONENTS AND PROCESSES TO BE ROHS COMPLIANT, CERTIFICATE REQUIRED WITH INITIAL SHIPMENT
PROTECTIVE CAP
COVERING CONNECTOR
FOR SECOND BATTERY
RISK OF ELECTRIC SHOCK.
W
WA
ARNI
RNIN
NG
G