Pitched Roof Mount System
With Self-grounding Hardware
Pitched Roof Mount System
16
of
24
Make sure the washer on the
threaded shank is positioned
correctly. Use roofer bar to lift roof
shingle, slide the flashing under
shingle, and insert the flashing on
threaded shank as shown.
Optional: A U shaped bead of
sealant can be added under the
flashing if the installer is
concerned with water migration
Fig. 8
: Slide the roof flashing into place
under the overlapping shingle and over the threaded
portion of the roof shoe
Insert L-Foot onto the large thread
on the roof shoe on top of
flashing. Place aluminum hex cap
on shoe, and finger tighten the
cap. Then tighten to 15 ft. lbs.
nominal torque.
Fig. 9
: Install the L-Foot and Aluminum hex cap
and tighten to 15 ft. lbs.