Sunmi T5930, Руководство пользователя

Страница: 2 / 10

Printing instructions
This device supports 58mm thermal paper with the specifications
of 57±0.5mm*Ø50mm
· Please open the paper container with the uncovering handle
(as shown in Fig.1). Please do not force open the paper
container to avoid print head gear wear;
· Feed the paper correctly into the paper container in the
direction as shown, and pull some paper outside the cutter
(as shown in Fig.2);
· Close the cover of the paper container to finish printing paper
feeding(as shown in Fig.3).
Note: If the printed paper is blank, please check whether the
paper roll has been installed in the correct direction.
Type-C USB
Power Outlet
Charger & Adapter
Product Description
Volume key
Power key
+
-
Printer
Type-C USB
Opening
handle
Camera
Speaker
Extended
interface
SIM Card Slot
Extremely easy settings
Only a few steps to activate an intelligent business device
①
Set 2G/3G/4G: when power off, insert the 2G/3G/4G
card and then power on.
(Refer to the Technical Specifications for the support of
cards)
② Long press the Power Key for 2~3s to activate the
backlight of screen,and then operate following the
prompts after entering the startup/booting screen for the
first time. 2 modes for accessing the Internet are available.
③
Set WiFi
· Click "Set" button, activate "WLAN" to enter the WLAN
searching screen, and wait it to list all useable WLAN hot
spots;
· Click the WLAN to be connected, and enter the access
password in case of an encrypted network.
Download/use Apps
After connected to the Internet, open the App Market,
find, download and install the Apps.
FAQ
Booting failure (e.g. low battery)
· Plug the USB cable and charge for 3min;
· Check if the screen displays the normal charging status.
System crash
· Long press the Power Key for 11s to reboot.
Read the installed Help App for more information
Battery cover
Nano
SIM
3
2
1
Power key
Short press: wake up the screen, lock the screen.
Long press: long press for 2-3 seconds in power off
mode to switch on the device.
Long press for 2-3 seconds in normal
operation mode to select power off or
reboot.
Long press for 11 seconds when system is
frozenfor automatic reboot.
Volume key
Volume adjustment.
Printer
For printing sales slips in power on mode.
Type-C USB
For device recharging and developer debugging.
Camera
For payment scanning and 1D/2D code quick
scanning.
SIM Card Slot
Note: To prevent system errors, please make sure the
device is turned off when you insert or remove the SIM
card.
Instructions for recharging and battery
This device supports charging only by USB cable
· Connect the 5V adapter to the power supply socket;
· Connect the USB cable to the USB interface of the device for
recharging; · The screen will display the recharging icon during
the recharging process;
· If the recharging icon does not appear, please check whether
the USB interface is well connected.
Instructions/Notes for battery
· This device adopts 7.6V/2580mAh lithium battery;
please do not disassemble the battery.
· In order to protect the battery life, we recommend that
yourecharge the device whenever possible, and please do
not allow the battery to fully drain before recharging.
Precautions
Safety Warning
· Connect the AC plug to the AC socket corresponding
to the marked input of the power adapter;
· Do not use in the presence of any potentially explosive
gas;
· To avoid injury, unauthorized persons shall not open the
power adapter; · This is a Class A product. This product
may cause radio interference in living environments.
In that case, the user may be required to take
adequate measures against interference.
· Battery replacement:
1. Explosion danger may arise if replacing with the
wrong battery!
2. The replaced battery shall be disposed of by
maintenance personnel,and please do not throw it
into fire!
Significant Safety Instructions
· This terminal is a handheld device, and the user shall
protect the password from being peered at by others
while entering the password;
· Do not install or use the device during lightning storms
to avoid the potential risks of lightning shock;
· Please turn off the power immediately if you notice
abnormal odor, heat or smoke;
· The paper cutter is sharp, please do not touch!
Suggestions
· Do not use the terminal near water or moisture to
prevent liquid from falling into the terminal;
· Do not use the terminal in extremely cold or hot
environments, such as near flames or lit cigarettes;
· Do not drop, throw or bend the device;
· Use the terminal in a clean and dust-free environment
if possible to prevent small items from falling into the
terminal;
· Please do not use the terminal near medical
equipment without permission.
Statements
The Company does not assume responsibilities for the
following actions:
· Damages caused by use and maintenance without
complying with the conditions specified in this guide;
· The Company will not assume any responsibilities for
the damages or problemscaused by optional items or
consumables (rather than the initial products or
approvedproducts of the Company). The customer is
not entitled to change or modify the product without
our consent.
· The product’s operating system supports official
systemupdates, but if you change the operating
system into a third party ROM system or alter the system
files by system cracking, it may cause system instability
and security risks and threats.
Disclaimer
As a result of product upgrading, some details in this
document may not match the product, and the actual
product shall govern. The Company reserves the right of
interpretation of this document. The Company also
reserves the right toalter this specification without prior
notice.