Sunlux XL-9600, Полное руководство

Страница: 15 / 28

15
Look up the data code table and scan the data code table ‘0’ and ‘5’ in turn;
(4) Finally, scan the setting code "Saved and Finished Set".
Remarks: Only operate (1) and (4), then you can clear the character settings before hiding or
restore the factory.
Hide back character
Steps:
(1) Scan the setting code "Hide back character"
(2) Set the last few digits of the countdown to be hidden (including its own data), represented by
two data codes
Decimal number XX
(3) Set the number of digits to be hidden forward from the penultimate digit, and use two data
codes to represent decimal
System number YY
(4) Finally scan the setting code "Saved and Finished Set".
XX represents the penultimate digit, that is, hidden from the penultimate character (including
itself);
YY represents how many digits are hidden, that is, how many digits are hidden forward
For example: the barcode content is: "ABCDEFGHIJKLMN", hide these characters DEFGH,
Make the output bar code "ABCDIJKLMN".
(1) Scan the setting code "Hide front character"
(2) The position of the character ‘H’ is the 7th bit, so "XX" is ‘0’, ‘7’,
Look up the data code table and scan the data code table ‘0’ and ‘7’ in turn;
(3) Hidden "DEFGH" means a total of 5 characters, so "YY" is ‘0’, ‘5’,
Look up the data code table and scan the data code table ‘0’ and ‘5’ in turn;
(4) Finally, scan the setting code "Saved and Finished Set".
Remarks: Only operate (1) and (4), the character setting after clearing hidden or restoring to
factory can also be cleared.
Add prefix and suffix Settings
Add Prefix setting
Add Suffix Setting