3.2
Product characteristics of the power wheelchair
●
Classification by anti-shock type: wheelchair is internal power supply;
●
Classification according to the degree of anti-shock: wheelchair
belongs to the B-type application part;
●
Classification according to the degree of protection of the feed: IPXO;
●
Safety degree when used in flammable anesthesia mixed with air or
flammable narcotic with oxygen or oxidized nitrogen Category: Non-AP
or APG equipment;
●
By operating mode: continuous operation;
●
Rated voltage and frequency of wheelchair: DC 24V;
●
Input power of wheelchair: internal power supply equipment;
●
Whether the wheelchair has a protective effect on defibrillation effect: No;
●
Whether the wheelchair has a signal output and input part: No;
●
Permanent installation of equipment or non-permanent installation of
equipment: mobile devices.
3.3
ELECTRICAL DIAGRAM OF POWER WHEELCHAIR
4.
SPECIFICATION
The main specification includes dimension and weight.
JOYSTICK
CONTROLLER
CONNECTORS FOR RIGHT MOTOR
CONNECTORS FOR LEFT MOTOR
RIGHT MOTOR
RIGHT BRAKE
24Volts lithium battery
LEFT BRAKE
LEFT MOTOR
ELECTRICAL DIAGRAM OF W5517
CONNECTORS FOR BATTERY
3.4 Product Software Version
Software version of power wheelchair W5517 is V1.8.
Overall Dimensions(L*W*H)
Seat Height
Seat Width
Seat Depth
Armrest Height
Seatback Height
Battery W
eight
Wheelchair W
eight
Maximum Speed
Braking Distance
Minimum
T
urning Radius
W
eight Capacity
Theoretical
T
ravel Range
Static Stability
Dynamic Stability
Slope Performance
Climbing
Ability
Motor
T
ype
Battery
T
ype
Max. Output Current of Controller
Max. Output Current of Charger
Front Wheel
Rear Wheel
1020mmX620mmX920mm
460mm
430mm
420mm
240mm
540mm
3.6kg
30kg
≤6km/h
≤1500mm
≤1200mm
150kg
20km
≥9°
≥6°
≥9°
≥6°
24V/250W
24V/20AH
35A
2A
Sheet 1
Inflate-free tire;
Outside size 200mm
Inflate-free tire;
Outside size 300mm
Note:
➀
The weight capacity is tested with a dummy or personnel of same weight.
➁
Theoretical Travel Ranging is tested on flat road with average speed. It will vary due to drive surface, operation
habit,etc.
7
8
4. SPECIFICATION
