Owner’s Manual — Sunlawn EM-2
7
STARTING AND OPERATING
1.
To start and operate the mower, press and hold down the red
safety button with your finger, and with the other hand pull the
starting lever back toward the handle grip. There are similar
instructions on the handle itself stating: “To operate pull handle
while depressing safety button.”
2.
As soon as the mower has started, release the red safety button.
3.
When the starting lever is released, the motor switches off.
4.
The mower may be restarted at any time with the same procedure.
Please note: there is two to three second delay before the
mower will restart.
NORMAL MOWING
To obtain a clean cut, push the mower in straight lines (passes) at a
deliberate walking pace. Overlap the passes to even the cut and to
avoid any uncut strips.
MOWING USING THE GRASS CATCHER (OPTIONAL ACCESSORY)
The grass catcher collects the clippings as it mows.
1.
Install the catcher apron [Part # 14] on the non-spring pin side
2.
Push the spring pin on the other side
3.
Install the apron on the spring pin side
WARNING
•
Before starting the mower, check within the blade area for any
foreign objects and remove them.
•
Do not operate the mower on areas other than turf surfaces.
The mower should be sitting upright on a level part of the lawn
before starting operation.
!
