SunL SLGK-150, Руководство пользователя

Страница: 14 / 16

SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
where the revolution begins to rise.
☆
It is necessary to adjust Accelerator Cable and the
screw nut in the end of Carburetor if Free Path of
Accelerator is not in its proper distance. You should lock
it after adjustment.
☆
Please replace Accelerator Cable if it is damaged.
☆
Inspect the return spring of Accelerator Pole and
replace if it can not work properly.
7.6 Tire Check
☆
The tires of the vehicle are low pressure ones, The
over-high or over-low Air Pressure benefits nothing to
the proper performance. The measure of Air Pressure
should be conducted under the cool state.
☆
Depth of Tire Checker
Please check surface and side and make sure that
there is no crack on it, no foreign substances in it and no
leakage of air. You should replace the tire if the depth of
tire checker is less than 2 mm.
7.7 Battery
☆
You must connect the red wire to “+” pole and the
black wire to “-” pole when installing the battery. You
should replace the battery if it cannot store electricity.
Generally speaking, battery should be replaced every
2-3 years.
☆
Safety Wire
Safety Fuse must be installed in the safety wire box.
If safety wire is frequently damaged, there is possibly
a short circuit or over-loading.
The change of Safety Wire:
a. Open safety wire box and take out the safety wire
plate.
b. Insert the new safety wire plate into safety wire box.
c. Resume the cover of safety wire box.
7.8 Carburetor
The idle speed adjusting screw bolt on Carburetor is
used to adjust the speed of idle speed. Tighten the
screw and the speed will slow down; loosen the screw
and the speed will speed up. You must adjust the speed
to the lowest stable position when adjusting.
The rest inspections of Carburetor need certain
experiences and please contact the dealers of franchiser
for technicians’ help.
7.9 Steering System
Routine screw inspections for the Steering Pole,
Steering Machine and Turning Pole are necessary.
Toe-in: You adjust them by pulling Pole and the
distance is 3-6 mm.