1. New generation, new technology Gen DSP adopted
Ⅱ
2. This camera supports the supreme resolution.(600 TV-Line Color)
3. This product is suitable for 24 hours survillance with optical multi-
coating filter according to IR LED and CCD.
4. Long visible range at night.(70m Max. Indoor)
5. Day & Night Function(ICR) at night to receive maximum available light.
6. This product can match for any circumstances very well.
7. This product is "weather-proof" to resist rain, snow and other weather
factors.(IP66)
8. Sunvisor of this product can help the camera get the picture clearly.
9. This product is made of corrosion-free surface to resist rust and
corrosion for a long time.
10. This camera has vari-focal IR lens to prevent defocusing under IR
lighting.
11. RS-485 interface(Pelco-D, Pelco-P protocol support) - Option
12. Support 8 different privacy zone
13. Adopted 3D DNR technology, It reduces noise efficiently in low light
condition.
14. Multi-language full OSD support
15. Power & video cables are concealable.(Cable through bracket)
16. You can connect 24V AC or 12V DC regardless polarity.(Dual power
version only)
17. You can adjust the level of IR LED according to the circumstances.
18. A fan enables the camera to keep the proper operation when the
LED is ON.
19. Provide Max. 10x digital zoom
20. LWDR(Low frame Wide Dynamic Range) & DWDR(Digital Wide Dynamic
Range)
21. DIS(Digital Image stabilizer) relieves any picture tremble due to external
factor such as wind.
22. Dynamic IR : When IR LED is turned on in B/W, the objects can be
clearly identified due to the function that decreases screen saturation
of objects within a short distance.
1. Please study the instruction manual before your applications and
keep it for your future reference.
2. Do not flash LED light directly on the eyes when LEDs are on.
3. Do not install the camera on a unstable surface.
It will cause falling or other hazards.
4. Do not use improper power, it could cause fire or electric shock.
(Use the AC adaptor 12V DC regulated, 1.5A.
Dual voltage product can use 24V AC, 1A
)
5. Do not disassemble or re-model the camera, it could cause fire,
electric shock or other hazards.
6. Stop using the camera when you find a malfunction like smoke or
unusual heat, it could cause fire or electric shock.
7. Due to the possibility of water leakage, do not cut or peel off the
cable. In case you cut or peel off the cable, the warranty will be void.
8. Do not adhere dangerous articles to the camera.
9. Do not leave the unit along with an unstable stand or table.
10. Power cable or video cable should be always loose.
Do not keep the cables tight or twisted.
11. Please use the camera unit within given temperature and electricity
limit.
12. Please make sure that installation should be done by qualified
service person only.
13. Do not disassemble the unit by yourself. When there is problem
with the unit please contact after-sale service center or the shop
where you bought.
adaptor.-option
FEATURE
CAUTION
1. Make a hole on the wall
2. Insert the screw anchors.
3. Fix the screws.
CONFIGURATION
PROTECTIVE SHEET
(Remove it before
operating camera)
SUNVISOR FIXING BOLT
SUNVISOR
BRACKET
VIDEO CABLE
BODY
POWER CABLE
12V DC(
)
24 A (option)
V C
WALL
ANCHORS
SCREW TP1 6x35
MOUNT HOLE
ACCESSORIES
ANCHOR 8x35, 4EA
SCREW 6x35 Tp1 BIND SUS, 4
SCREW DRIVER TORX T10x105, 1
HEXAGON WRENCH 6.0mm L TYPE, 1
BOLT 1/4"-20UNC L=6, 1
BOLT 1/4"-MOUNT-1/4", 1
EA
EA
EA
EA
EA
BOLT M8X12, 1EA
HEXAGON SOCKET HEAD SUS, 1EA
Extra video output cable for
installation(Option)
If the product is to be put out of operation definitively,
take it to a local recycling plant for a disposal which
is not harmful to the environment.
INSTALLATION
GEN IR WATERPROOF D&N CAMERA
SK-P441(D)/M844AI
MANUAL
Ⅱ
