Part List
No.
Part Description
Qty.
A
Chair back
1
B
Left arm
1
C
Right arm
1
D
Seat board
1
E
Support bar
1
AA
M6x35 Bolt
6
BB
M6 Spring washer
10
CC
M6 Flat washer
10
DD
M6x15 Bolt
4
EE M6x15 Countersink hex bolt
2
FF
M6 Wrench
1
GG Pad (Preassembled on B,C)
4
Step 1:
Fig.1: Attached Left arm (B) / Right arm (C) onto both
side of Support bar (E) with Bolt (DD), Spring washer
(BB), Flat washer (CC), by using Wrench (FF)
, don’t
tighten them in this step.
Fig.2: Connect both side of Seat board (D) with Left arm
(B) / Right arm (C) with Bolt (AA), Spring washer (BB),
Flat washer (CC), by using
Wrench (FF), don’t tighten
them in this step.
Step 2:
Fig.1: Insert each side of Chair back (A) into
the hole of Left arm (B) / Right arm (C).
Fig.2: Tighten each side of Chair back (A) and
Left arm (B) / Right arm (C) with Countersink
hex bolt (EE) by using Wrench (FF). Then,
tighten all the bolts.
Go over all the assembly steps.
Step 1
Step 2
