October 16
Made in China
3 / 4
ASSEMBLY STEPS
Step 1
：
Attach Post (G) to Base (I) by using bolts (BB) and
Washer (DD). Do not fully tighten the connections in
this step.
Step 2
：
Attach Rear Board (D), Side Mesh (E) and Door (F) to
Post (G) by using Bolt (BB) and Washer (DD) Assemble
Rear Board (D) to the labeled back side of Base (I). Do
not fully tighten the connections in this step.
Step 3
：
Place Upper Base (C) onto Post (G) and attach them by
using bolts (AA), Nuts (CC) and Washer (DD). (Note:
front and back side of Upper Base (C) is labeled). Fully
tighten all connections.
Step 4
：
Connect Chimney Top (A) and Chimney (B) by using
Nut (CC) and Washer (DD).
Step 5
：
Place Fire Bowl (H) into Base (I) and
place
Chimney
(B) onto
Upper Base
(C).
Finally, keep the Poker (J) near your fire
place for use.
