Fig.10:
Insert Big top beam (L) into Corner connector (H1&H2).
Fig.11:
Attach Arch beam M (N) to Middle beam connector (J) by Bolt (EE), Flat washer (BB) and Nut (FF).
Fig.12:
Attach Hook (Z) to Small top connector (T), then insert Small top bar (U) into Small top connector (T).
Put on the Small canopy (V).
Fig.13:
Put on the Large canopy (W), do not spread. Attach the assembled small top to Big top.
HH
Φ6X260MM Peg
16 PCS
GG
Plastic tie
104 PCS
Hardware Pack 3
Fig.7:
Connect Corner connector (H1&H2) and A by Bolt (AA) and Flat washer (BB).
Fig.8:
Insert Big top long bar (R) and Big top short bar (S) into Big top connector 1 (Q1) and Big top connector
2 (Q2).
Fig.9:
Insert Big top beam (L), Long arch beam (M), and Short arch beam (N) into the assembled frame.
Содержание L-GZ659PST
Страница 1: ...Assembly Instructions Item L GZ659PST ...