Assembly (continued)
5
Assembling the oblique
beams
6
Assembling the roof
□ Insert the oblique beams (L) into oblique beam
connectors (M). Secure the oblique beam connectors
(M) to the U-shaped assembly using bolts (CC), flat
washer and nuts (DD).
NOTE:
To avoid destroying the finish, please handle
it with care.
□ Insert the oblique beams (L) into the connecting tube of
big roof connector (N). Secure the hook (R) to the big
roof connector (N).
Please note Connector (N) is marked
with K & L labels for insertion into proper tubes.
7
Attaching the middle beams
to the roof connector
8
Securing the middle beams
□ Insert the middle beams (J and K) into the big roof
connector (N).
Follow labels on (N) for proper tube
insertion.
□ Install either middle beams 1 (J) or middle beams 2 (K)
to the U-shaped piece of the straight pipe connectors (S)
using bolts (CC), flat washers (BB) and nuts (DD).
Place the big canopy (U) on the assembled big roof.
Do not unfold it completely.
7