BATTERY/LIGHTING UNIT INSTRUCTIONS:
1. Six AAA batteries are sold separately.
2. When you install the batteries of light, screw off handle of the light, and move the cover on the top of the light.
Put the batteries to battery compartment and align batteries according to the labeling as Fig.1. Then close the
battery cover, screw on the handle and tighten.
3. When you install the batteries of remote control, open the battery cover according to labeling on battery
compartment. Then put the batteries to battery compartment and align batteries according to the labeling as Fig.2.
4. Switch the light unit on/off by remote control and extra long chain on the bottom of the light.
SAFETY INFORMATION!
WARNING:
Do not mix old and new batteries. Do not mix alkaline, standard (Carbon-Zinc), or rechargeable (Nickel-Cadmium)
batteries.
If you find any noise, excessive temperature or leakage from a battery, please discard.
When not using the unit for a considerable period of time, disconnect the batteries from the unit for storage.
If battery power is weak during use, switch off the device and dispose of batteries.
Fig.6:
Attach small top roof panel (H) to roof panel (E) with bolt (EE) and washer (BB).
Fig.7:
Attach big top roof panel (I) to roof panel (E) with bolt (EE) and washer (BB).
Fig.8:
Attach cover plate (J) to pothook beam (F) with bolt (FF) and washer (BB). Hang LED light (N) to the
pothook (G) when use.
Fig.9:
Fix assembled gazebo to grass ground with peg (GG).
