Fig.6:
Insert the tilted top bar connector F1 (F2) into the top screen corner.
Fig.7 & Fig.7-1:
Attach the pothook (L) to Big top connector (J), insert four tilted top bar (F) into big top
connector (J). Then insert the tilted top bar (F) into tilted top bar connector F1 (F2). At last, insert the long side
top bar (G), short side top bar (H) into the big top connector (J).
Fig.8:
Attach long side top bar (G), short side top bar(H) to short bar (E) and long bar (E1), tighten them by
using Bolt (EE), Flat washer (BB) and Nut (FF).
Fig.9:
Insert small top bar (I) into small top bar connector (K) to form a small top frame
.
Fig.10:
Put big canopy (Q) on the big top, but do not fully spread. Fix the small top onto the tilted top bar (F)
by using bolt (EE), washer (BB) and nut (FF).
